Protective gloves for marble mason, stonecutter
Work with 2-component resins, paint, varnish and adhesives (protection against accidental contact)

Gloves in pure nitrile. They must be replaced when they have been contaminated by the product being handled. The material of the gloves can be permeated by chemicals after a short period of contact, or it can tear.
Liens Cours
Manual work in wet and cold conditions

Lined gloves, impermeable
Liens Cours
Manual work in winter and with cold objects

Lined gloves, not impermeable
Liens Cours
Heavy rough manual work involving contact with cement

Textile gloves for protection against mechanical risks, giving enhanced resistance against abrasion. The coating gives a degree of protection against occasional contact with cement.
Liens Cours
Mixing of 2-component resins (epoxy, acrylates, etc)

Gloves resistant to chemical products, manufactured from a variety of materials. The manufacturers usually provide supplementary information on the resistance of the gloves to different chemical products.
Liens Cours
Handling stone and work with stone

Gloves with specific abrasion resistance
Liens Cours
Warning notice: It is essential to check the resistance of the gloves to specific chemicals by referring to resistance tables
Herein below we give a few guidelines for the use of gloves although we take no responsibility for these recommendations. These guidelines do not replace the analyses of physical and chemical risks at each workplace including proper evaluationof technical specifications supplied by distributors and manufacturers.