Protective gloves for metal construction / locksmith
Work with 2-component resins, paint, varnish and adhesives (protection against accidental contact)
Gloves in pure nitrile. They must be replaced when they have been contaminated by the product being handled. The material of the gloves can be permeated by chemicals after a short period of contact, or it can tear.
Erection works involving wet metal
Gloves partially coated with latex
Soldering and welding (normal requirements, MIG, MAG)
Gloves in leather or gloves in textile and leather
Welding involving enhanced risk
Special welders’ gloves conforming to the standard 12477
Work with objects hotter than 100°C
Gloves conforming to the standard SN EN 407 for contact with objects up to a temperature of 250 °C or more
General manual work, dry
Gloves for protection against mechanical risks. Many types of gloves conforming to the essential requirements of the standard SN EN 388.
Warning notice: It is essential to check the resistance of the gloves to specific chemicals by referring to resistance tables
Herein below we give a few guidelines for the use of gloves although we take no responsibility for these recommendations. These guidelines do not replace the analyses of physical and chemical risks at each workplace including proper evaluationof technical specifications supplied by distributors and manufacturers.