Protective gloves for electroplating operator
Work with various chemical products (protection against intensive and prolonged contact)
Gloves resistant to chemical products, manufactured from a variety of materials. The manufacturers usually provide supplementary information on the resistance of the gloves to different chemical products.
Work with various chemical products (protection against accidental contact)
Single-use gloves manufactured from a variety of materials. They must be replaced when they have been contaminated by chemical products. The material of the gloves can be permeated by chemicals after a short period of contact, or it can tear.
Manual work with risk of minor injuries (from rough timber, sharp metal edges, etc)
Partially-coated textile gloves giving a degree of protection against the rough surfaces of timber, metal edges etc
Work with hot objects up to 100°C
Gloves conforming to the standard SN EN 407 for contact with objects up to a temperature of 100 °C
Warning notice: It is essential to check the resistance of the gloves to specific chemicals by referring to resistance tables
Herein below we give a few guidelines for the use of gloves although we take no responsibility for these recommendations. These guidelines do not replace the analyses of physical and chemical risks at each workplace including proper evaluationof technical specifications supplied by distributors and manufacturers.